Airworthiness Directive

+Federal Register Information

-Header Information
DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

AD 51-23-03



Airworthiness Directives; Piper Models PA-16, PA-20, and PA-22 Aircraft
PDF Copy (If Available):



-Preamble Information
AGENCY: Federal Aviation Administration, DOT













-Regulatory Information

51-23-03 PIPER: Applies to Model PA-16 Aircraft, Serial Numbers 16-1 and Up; PA-20 Aircraft, Serial Numbers 20-1 Through 20-802; and PA-22 Aircraft, Serial Numbers 22-1 Through 22-348.

Compliance required as soon as possible, but not later than October 15, 1951.

Install insulators of sufficient area inside the battery box cover over the battery terminals to positively prevent a metallic contact between the wing nuts or terminals and cover. Hard fiber rubber or phenolic insulating materials 1/16-inch minimum thickness may be used.

(Piper Service Bulletin No. 118 covers this same subject.)



-Footer Information


+Comments