Airworthiness Directive

Federal Register Information

Header Information
DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

AD 60-05-03



Airworthiness Directives; [Revision] Piper Models PA-22 "150" and PA-22 "160" Aircraft
PDF Copy (If Available):



Preamble Information
AGENCY: Federal Aviation Administration, DOT













Regulatory Information

60-05-03 PIPER: Amdt. 108 Part 507 Federal Register March 2, 1960. Applies to PA-22 "150" and PA-22 "160" Aircraft Serial Numbers 22-3218, 22-3387, 22-3388 to 22-7049 Inclusive, and 22-7054.

Compliance required by April 1, 1960.

Install safety belt extension, P/N 14920-02 or equivalent, on the front seat belt in order to eliminate deterioration due to heat from the rear seat heater outlet and chafing where the web attaches to the attaching lug. P/N 14920-02 has the same geometric design as P/N 14920-0 being replaced, except that P/N 14920-02 is one inch longer measuring 3.5 inches between bolt centerlines.

(Piper Service Bulletin No. 184 covers this same subject.)

This supersedes AD 57-17-02.

Revised November 2, 1960.



Footer Information


Comments