For Cutting Metal
Made especially for use of Structural Iron Workers, particularly in places where the ordinary hack frame cannot be used.
Of Special temper, and hollow ground for clearance. 12 points to the inch. Teeth in this saw cannot be set.
Similar to No. 340. 10 points to the inch. Teeth cannot be set.
Designed especially for cutting light-pressed steel shapes-- steel mouldings and metal trim of all kinds. Special temper, and hollow ground for clearance. Regularly made 16 points to the inch. Teeth cannot be set
This saw is used for cutting Kalomine-- soft metal drawn over a wooden or composition body-- and material of a similar nature. 11 points to the inch. Teeth can be set.