Models and Miniatures

Interior models

Home | Typical Detail Levels | Services | Interior models | Images | Products 1 | Products 2 | Contact Aimee Eng

 

EastEnd8.jpg
1/4"=1'-0" Chapel model for the Carmelite Abbey. Architect - J. David Richen

 
 
 

BenedictineSisters01.jpg
Benedictine Sister's Chapel Mt. Angel, Oregon Arch, J. David Richen

 The Benedictine Sisters went through several design options and an earthquake before David Richen arrived at this design conclusion.   Once again this is a 1/4" = 1'-0" model of an interior space that was yet to bebuilt.  This one had to be designed so that all the walls would come out.  This allowed us to photograph the model around 360 degrees.  It also allowed us to photograph a plan view from above, and a ceiling view looking straight up.

NHMews.jpg
1/4"=1'-0" Interiors for the North Harbor Mews in

NHMews2.jpg
North Portland, Robert Leeb Architects.

int1.jpg

int2.jpg

int3.jpg

North Harbor Mews project.  Three completely different models were required.  A 1"=50' site model, a 3/32"=1'-0" site model, and this 1/4"=1'-0" typical module/interior model.  I actually had the lower section of this model sealed when it was decided  that the lower unit should have lighting.  Still when it all comes together you have to feel good.
 
 
Sunset Athletic Club Phase III Swim Center Expansion

P1010030.JPG
Architect, Sal Khan - Portland, Oregon May 2004

P1010014copy.jpg
3/16" = 1' - 0" model for Sunset Athletic Club.

P1010101.JPG
Architect Sal Khan, Portland, Oregon.

DSCN0888copy.jpg
Proposed Chapel for Trappist Abbey 1/4"=1'-0", Architect J. David Richen

Enter supporting content here

            Home | Typical Levels of Detail | Services | Interior Models |ProductsContact Aimee Eng

                Portland, Oregon 97007

            All content is copyright of Aimee Eng and associated designer or architect please do not reproduce any images or text without permission.

Scale Model boat fittings