Bushtec v2 Trailer Hitch

Loosen Muffler Clamps
Intro
Seat and Side Cover
Rear Fender
Floorboard Holder
Saddlebag Guard
Muffler Hanger
Muffler Clamps
Saddlebag Subframe Lower Bolt
Assemble Hitch
Install Ubolts
Saddlebag Subframe top Bolt
Vertical Struts
Bottom Strut Attachment
Receiver Head
Isolation Wiring Harness
Locating the Harness
Connecting the Sub Harness
Connecting the 5 to 4 converter (if needed)
Positive and Negitive Leads
Plastic Split Loom
Wiring ouput
With and without Hitch

Loosen, Do Not Remove Muffler Clamps

Muffler_Clamps.jpg

Loosen both allen bolts then rotate down a bit being very careful not to let the shielding bend at the seam.  This allows room to slide the hitch between the muffler and saddlebag.

Next