Bushtec v2 Trailer Hitch

Intro
Seat and Side Cover
Rear Fender
Floorboard Holder
Saddlebag Guard
Muffler Hanger
Muffler Clamps
Saddlebag Subframe Lower Bolt
Assemble Hitch
Install Ubolts
Saddlebag Subframe top Bolt
Vertical Struts
Bottom Strut Attachment
Receiver Head
Isolation Wiring Harness
Locating the Harness
Connecting the Sub Harness
Connecting the 5 to 4 converter (if needed)
Positive and Negitive Leads
Plastic Split Loom
Wiring ouput
With and without Hitch
Bushtec V.2 Trailer Hitch Installation for the GL1800

I found the printed instructions a bit difficult without pictures, so I decided to take a few photos as I proceeded with the instructions.  This page is not intended to take the place of the installation instructions but to be used along with the instructions. 

Bushtec_hitch.jpg

Here is the hardware for the Bushtec Standard V.2 Hitch, minus the nuts and bolts, Isolation Harness, lock and chrome hitch.  Notice bar closest to the bottom, this is what the instructions refer to as the right hoop side with 3 bends. 

Next