I started with the vertical stab because it looked like a simple piece and it would give me something to look at while
also being small enough to store.
CONSTRUCTION TIP:
Square up those fiberglass tail tips before you install them.
![tailtips007.jpg](sitebuildercontent/sitebuilderpictures/.pond/tailtips007.jpg.w560h372.jpg)
The Horizontal Stab was next.
CONSTRUCTION TIP:
Draw the pattern of rib locations on the bench and secure them into position. You will find it much easier
to align parts.
![tail001.jpg](sitebuildercontent/sitebuilderpictures/.pond/tail001.jpg.w560h448.jpg)
I used a block of wood cut to fit inside the elevator skin to give the skin some rigidity while I cut it with the Dremel
cutting wheel.
![elevator003.jpg](sitebuildercontent/sitebuilderpictures/.pond/elevator003.jpg.w560h420.jpg)
Finished Tail Feathers
![tailtips013.jpg](sitebuildercontent/sitebuilderpictures/.pond/tailtips013.jpg.w560h420.jpg)
|